CertExams.com Simulator Lab Exercises Answers
Console Based :
Description: The Exercise helps to Configure firewall filter based on the instructions and view ACL or firewall entries entries by using appropriate show command.
Instructions:
1. Enter into Configuration Mode
2. Enter into firewall filter mode by creating a filter with name filter1
3. Apply the match-condition that permit ip 192.168.10.5
4. Use the show command to see the ACL
On R1
user@R1>configure
[edit]
user@R1#edit firewall family inet filter filter1
[edit firewall family inet filter filter1]
user@R1#set term term1 from source-address 192.168.10.5/24
[edit firewall family inet filter filter1]
user@R1#set term term1 then accept
[edit firewall family inet filter filter1]
user@R1#exit
[edit]
user@R1#show
[edit]
user@R1#commit
commit complete
[edit]
user@R1#exit
user@R1>show configuration
GUI Based :
Description: The Exercise helps to Configure firewall filter based on the instructions and view ACL or firewall entries entries by using appropriate show command.
Instructions:
1. Select device R1 and click Configure button and select Security > Firewall Filters from left navigation pane
2. In Firewall Information window click Add button
3. Enter Filter name as filter1 and term name term1 , Source address as 192.168.10.5 and then action as accept and click Add button in Firewall configuration window and then click OK button
4. Close the firewall Information screen.
5. Select CLI Tools > CLI Viewer to view show configuration command.
