CertExams.com Simulator Lab Exercises Answers

Router Interface Address Configuration

Console Based :

Description: In this lab, you configure so-1/1/0 interface under unit 0 and family inet on a router with specified ip address and subnet mask. Choose R1 in the network diagram and exit.

Instructions:

1. Enter into configuration mode

2. Set IP Address of so-1/1/0 as 196.20.32.15 and subnet mask as 24

user@R1>configure
[edit]
user@R1#edit interfaces so-1/1/0
[edit interfaces so-1/1/0]
user@R1#edit unit 0 family inet
[edit interfaces so-1/1/0 unit 0 family inet]
user@R1#set address196.20.32.15 /24
[edit interfaces so-1/1/0 unit 0 family inet]
user@R1#exit
[edit interfaces so-1/1/0]
user@R1#exit
[edit]
user@R1#

GUI Based :

Description: In this lab, you configure so-0/0/1 interface under unit 0 and family inet on a router with specified ip address and subnet mask.

Instructions:

1. Select device R1 from Select device drop down box

2. Click Configure button that enables left navigation pane

3. Select Interfaces -> Interface Configuration

4. Interface configuration screen appears select so-0/0/0 interface from available interface list and click Edit button.

5. The Configure Interfaces screen appears set the ip address as 196.32.20.15 in IPV4 addresses field and prefix as 24 and click OK button.

Note: Please refer to the CertExams.com Juniper Network Simulator software for complete lab with GUI Interface.