CertExams.com Simulator Lab Exercises Answers
Description: The lab helps to configure ipv6 address of the routes and test for traceroute
Instructions:
1. Assign IP address of all the devices as per the table given below
2. From R1 issue traceroute command to R3
| Device | Interface | IP Address and Mask |
| R1 | so-0/0/0
|
2001:db8:3::1/64
|
| R2 | so-0/0/0
|
2001:db8:1::2/64
|
| R3 | so-0/0/0
|
2001:db8:3::2/64
|
Note: Please refer to the CertExams.com Juniper Simulator software for complete lab with commands
