CertExams.com Simulator Lab Exercises Answers
Description: This exercise demonstrates configuring management IP address on a EX-Series Switch.
Instructions:
1. Enter into interfaces hierarchy mode
2. Set the management interface i.e, me0 address as
10.93.15.246/21.
Note: The EX-series switch management interface is a physical or
virtual port through which the switch can be configured and
maintained. The JUNOS for EX-series software automatically creates the
switch's management Ethernet interface, me0. The management
Ethernet interface provides an out-of-band method for connecting to
the switch. To use me0 as a management port, you must configure its
logical port, me0.0, with a valid IP address.
3. Verify using show command
Note: Please refer to the CertExams.com Juniper Simulator software for complete lab with commands
