CertExams.com Simulator Lab Exercises Answers
Console Based :
Description: The lab exercise explains how to configure LDP protocol on the interface.
Instructions:
1. Enter into configuration mode
2. Move to the protocols hierarchy
3. Enable the LDP protocol on all or particular interface
4. Exit from the protocol hierarchy.
5. Confirm the configuration by entering the show command from configuration mode
user@R1>configure
[edit]
user@R1#edit protocols ldp
[edit protocols ldp]
user@R1#set interface all
[edit protocols ldp]
user@R1#exit
[edit]
user@R1#commit
commit complete
[edit]
user@R1#show
To enable the LDP protocol on particular interface following command is used.
user@R1>configure
[edit]
user@R1#edit protocols ldp
[edit protocols ldp]
user@R1#set interface ge-0/0/0
GUI Based :
Instructions:
1. Select device R1 from Select Device drop down box
2. Click configure button and select MPLS > MPLS Configuration from left navigation pane
3. MPLS Configuration screen appears. Select All option button to enable LDP protocol on all the interfaces and click OK button.
Note: Please refer to the CertExams.com Juniper Network Simulator software for complete lab with GUI Interface.
