CertExams.com Simulator Lab Exercises Answers

Connectivity check between Router and workstations

Console Based  |  GUI Based 

Console Based :

Description: Lab Exercise explains pinging between router and work station

lab image

Instructions:

1. Connect to R1 and configure the IP address of 192.168.100.1/24 on the ge-0/0/0 interface

2. To assign ip address to WS1 click network diagram button and in network diagram window click WS1 icon from the diagram. And configure 192.168.100.2/24 as ip address and defaultgateway 192.168.100.1

3. To assign ip address to WS2 click network diagram button and in network diagram window click WS2 icon from the diagram and configure 192.168.100.3 as ip address and default-gateway as 192.168.100.1

4. Now ping ping R1 from WS1 and WS2 and check the connectivity.

GUI Based :

Instructions:

1. Select device R1 from Select device drop down box

2. Click configure button to enable left navigation pane

3. Select Interfaces > Interface Configuration from left navigation pane. Interface Configuration screen appears , select ge-0/0/0 interface from available interface list and click Edit button.

4. Configure Interfaces screen appears enter the ip address as 192.168.100.1 in ip address field and prefix as 24 and click OK button.

5. To assign ip address to WS1 select WS1 from Select device drop down , and click PC IPV4 properties from left navigation pane

6. PC IPV4 properties window appears , click option button Use the following ip address , ip address will get enabled and enter ip address as 192.168.100.2 , mask as 255.255.255.0 and default-gateway 192.168.100.1 and click OK button.

7. To assign ip address to WS2 select WS2 from Select device drop down , and click PC IPV4 properties from left navigation pane 

8. PC IPV4 properties window appears , click option button Use the following ip address , ip address will get enabled and enter ip address as 192.168.100.3 , mask as 255.255.255.0 and default-gateway 192.168.100.1 and click OK button.

9. To check the connectivity from WS1 or WS2 to R1 , select device WS1 and click Troubleshoot button to enable left navigation pane of troubleshoot button.

10. Click Ping Host from left pane , Ping/traceroute window appears enter the ip address 192.168.100.1 in the Ping field and click OK button.

11. Repeat step 9 and 10 for device WS2

Note: Please refer to the CertExams.com Juniper Network Simulator software for complete lab with GUI Interface.


CertExams Blog!  Certexams.com Facebook Page Certexams.com Twitter Page Certexams on YouTube