Telnet

Description: The purpose of this Lab is to configure IP Address on all the devices and test for telnet command.

Instructions:

1. Assign the IP address of all the devices as given below

Device	Interface	IP Address	Mask
R1	So-0/0/0 So-1/0/0	192.168.1.1 192.168.3.2	255.255.255.0 255.255.255.0
R2	So-0/0/0 So-1/0/0	192.168.1.2 192.168.2.1	255.255.255.0 255.255.255.0
R3	So-0/0/0 So-1/0/0	192.168.2.2 192.168.3.1	255.255.255.0 255.255.255.0

2. From R1 issue a telnet command to R2 and R3

Note: Please refer to the CertExams.com Juniper Simulator software for complete lab with commands.