Home >Juniper Network Sim>Lab Manual>Configuring the Encapsulation on a Physical Interface

Available labs  |   Supported Commands  |   Product Help

CertExams.com Simulator Lab Exercises Answers

Configuring the Encapsulation on a Physical Interface

Console Based   |    GUI Based

Console Based:

Description: The following lab configures the PPP encapsulation on the physical interface so-0/0/0

Instructions:

1. Enter into configuration mode.

2. Set the encapsulation of interface so-0/0/0 as PPP

user@R1>configure
[edit]
user@R1#edit interfaces so-0/0/0
[edit interfaces so-0/0/0]
user@R1#set encapsulation ppp
[edit interfaces so-0/0/0]
user@R1#exit
[edit]
user@R1#

GUI Based :

Description: The following lab configures the PPP encapsulation on the physical interface so-0/0/0

Instructions:

1. Select device R1 from Select device drop down box

2. Click Configure button that enables left navigation pane

3. Select Interfaces -> Interface Configuration

4. Interface configuration screen appears select so-0/0/0 interface from available interface list and click Edit button.

5. The Configure Interfaces screen appears. Select encapsulation “ppp” from Encapsulation drop down box and click OK button.

Note: Please refer to the CertExams.com Juniper Network Simulator software for complete lab with GUI Interface.

Real Time Web Analytics

Clicky