Home >Juniper Network Sim>Lab Manual>Configuring IPv6 address on a interface in general form

Available labs  |   Supported Commands  |   Product Help

CertExams.com Simulator Lab Exercises Answers

Configuring IPv6 address on a interface in general form

Enabling IPV6 : In junos ipv6 is enabled as soon as one interface is configured for ipv6

Description: This lab exercise explains steps required configure ipv6 address on an interface in general form.

Instructions:

1.Enter into configuration mode

2. Enter the [edit interfaces] mode to configure the ipv6 address of so-0/0/0 interface of R1.

3. Confirm the configuration by entering the show command from configuration mode

On R1

user@R1>configure
[Edit]
user@R1#edit interfaces so-0/0/0
[edit interfaces so-0/0/0]
user@R1#set unit 0 family inet6 address 2001:cb8:1::1/64
[edit interfaces so-0/0/0]
user@R1#exit
[edit]
user@R1#show

 

Real Time Web Analytics

Clicky