CertExams.com Simulator Lab Exercises Answers

Enable FastEthernet Interface on a 2950 Switch

Description: Here you enter interface configuration mode on a 2950 switch and make the interface protocol up. Choose 2950 switch by going to the network diagram, and selecting appropriate device.


1. Enter global configuration mode.

2. Enter interface sub-configuration mode for Ethernet slot#0 and port#1.

3. Shutdown the interface.

4. Exit to privileged mode.

2950#configure terminal
2950(config)#interface fastethernet 0/1
2950(config-if)#no shutdown

CertExams Blog!  Certexams.com Facebook Page Certexams.com Twitter Page Certexams on YouTube