CertExams.com Simulator Lab Exercises Answers
Description : A dynamic interface is simply an interface that maps a WLAN to a wired vlan or subnet. Dynamic interfaces to be used to control and secure the traffic on the WLAN just like
Points to be considered while creating Dynamic Interface:
Create a Dynamic interface and define a name and ssid.
Assign IP address, Subnet mask and Gateway
Assign a physical port number
And last is to config DHCP servers(Primary or secondary: atleast one is necessary)
1. From the WLC GUI, choose Controller > Interfaces.
2. The Interfaces page lists all the interfaces that are configured on the WLC. In order to create a new dynamic interface, click New.
3. Enter the Interface Name as “Vlan1” and VLAN Identifier as 1 and then click “Apply” button.
4. Interface > Edit page appears, enter IP address as 192.168.100.1,mask as 255.255.255.0,gateway as 192.168.1.1, Primary DHCP server 126.96.36.199 and Secondary DHCP server as 188.8.131.52 and then click "Apply" button.
Please refer to the CertExams.com Network Simulator software for complete lab with commands.