Description: Here you enter interface configuration mode on a 2950 switch and make the interface protocol up. Choose 2950 switch by going to the network diagram, and selecting appropriate device.
Instructions:
1. Enter global configuration mode.
2. Enter interface sub-configuration mode for Ethernet slot#0 and port#1.
3. Shutdown the interface.
4. Exit to privileged mode.
2950>enable
2950#configure terminal
2950(config)#interface fastethernet 0/1
2950(config-if)#no shutdown
2950(config-if)#end
Cert-Ex™ Exam Simulators, Cert-Ex™ Network Simulator, Cert-Ex™ Cheatsheets are written independently by CertExams.com and not affiliated or authorized by respective certification providers. Cert-Ex™ is a trade mark of CertExams.com or entity representing Certexams.com.Network+™ is a trademark of CompTIA® organization.
