Switch
2950 vty Password Assignment
Lab
Index |
|
|
Description: To assign
vty password for a switch for vty lines 0 to 15, choose 2950 switch
from the N/W diagram, and use the following commands. Note: The
password "virtualpass" is assumed. You can use any other
password.
Instructions:
1. Enter global configuration mode.
2. Enter line sub-configuration mode for virtual terminals 0 to 15.
3. Assign virtual terminal password "virtualpass" to lines 0-15.
4. Enable the switch to use the password for telnet access.
5. Eixit line sub-configuration mode.
6. Eixit to privileged mode.
2950>enable
2950#configure terminal
2950(config)#line vty 0 15
2950(config-line)#password virtualpass
2950(config-line)#login
2950(config-line)#exit
2950(config)#
PS: You can also use
short form commands.
