Certexams practice tests and network simulator Register             Login

Home >Network Simulator Labs>Basic switch interface configuration

Available labs  |   Supported Commands  |   Product Help

CertExams.com Simulator Lab Exercises Answers

Enabling RIPng (IPv6 RIP Process) on a cisco router interface

Description: This lab exercise demonstrates enabling RIPng for IPv6 (next-generation RIP protocol) on a router interface.


1. Enter into privileged mode on router R1.
2. Enter into global configuration mode.
3. Enter the command "ipv6 unicast-routing" that enables the forwarding of IPv6 unicast datagrams globally on the router.
4. Enter into interface configuration mode and then use the command "ipv6 rip <name> enable command to enable the specified RIP routing process on an interface.
5. Issue "show ipv6 rip" command that displays information about the configured RIP routing processes.

R1#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#ipv6 unicast-routing
R1(config)#interface serial 0
R1(config-if)#ipv6 rip pname1 enable
R1#show ipv6 rip
R1#show ipv6 protocols

Note: ipv6 rip <name> enable command enables the specified IPv6 RIP routing process on an interface. The process name is only significant within the router, and allows you to run more than one RIP process if you want to. Because it is only locally significant, every router can have a different RIP process name without conflict, although we generally don't recommend this, as it can become confusing to manage.



Real Time Web Analytics