Home >Network Simulator Labs>Basic switch interface configuration

Available labs  |   Supported Commands  |   Product Help

CertExams.com Simulator Lab Exercises Answers

Configuring EIGRPv6 on a router interface


Description: This lab exercise demonstrates steps required to configure EIGRPv6 on a router interface.

Instructions

1. Enter into privileged mode on router R1.
2. Enter into global configuration mode.
3. Enter the command "ipv6 unicast-routing" that enables the forwarding of IPv6 unicast datagrams globally on the router.
4. Enter into interface configuration mode and enable IPv6 processing on the interface.
5. Use the command "ipv6 eigrp <as-number>" to enable EIGRP for IPv6 on a specified interface and then issue no shutdown command to start the protocol.
6. Use the command "ipv6 router eigrp <as-number> to enter into router configuration mode and create an EIGRP IPv6 routing process.
7. The command "router-id <ip-address>" enables the use of a unique fixed router ID. Also use no shutdown command.

 

Real Time Web Analytics

Clicky