CertExams.com Simulator Lab Exercises Answers

Setting Host Name

Console Based  |  GUI Based 

Console Based :

Description: You set the router host name. Go to N/W diagram and choose device R1. Note that you can also use short form commands such as "conf term" in place of full command "configure terminal".

Instructions:

1. Enter into privileged mode

2. Enter into global Configuration Mode 

3. Set hostname as cisco.

R1>enable
R1#configure terminal
R1(config)#hostname cisco

You can give “show running-config” command to check the output ,where hostname changed to
cisco from R1

lab image

GUI Based :

Description: This basic exercise illustrates the steps required to set a hostname to a router.

Instructions:

1. Select device R1 from Select device drop-down list.

lab image

2. Click Configure button, this enables left navigation pane.

lab image

3. In the left navigation pane Click Router > Router Options .

lab image

4. This displays Additional tasks screen with Device Properties . In device properties list select Host Name and click Edit button.

lab image

5. Device properties screen appears, enter Host Name in HostName field and click Save button.

lab image
CertExams Blog!  Certexams.com Facebook Page Certexams.com Twitter Page Certexams on YouTube