Home >Juniper Network Sim>Lab Manual>Show Chassis Command On J and M Series Routers

Available labs  |   Supported Commands  |   Product Help

CertExams.com Simulator Lab Exercises Answers

Show Chassis Command On J and m Series Routers

Console Based   |    GUI Based

Console Based:

Description: This lab demonstrates the show chassis commands.

Instructions:

1. Display environmental information about the routing platform chassis, including the temperature and information about the fans, power supplies, and Routing Engine

2. Displays a list of all Flexible Physical Interface Card Concentrators (FPCs) and PICs installed in the router chassis, including the hardware version level and serial number.

3. Displays the FIC information, such as the FIC type, ASIC type, operating status, PIC version, and the amount of time the FIC has been online. The command output also displays port cable information.

  GUI Based :

Instructions:

1. Select device R1 from Select device drop down box

2. Click Monitor to enable left navigation for monitor button

3. Select Chassis -> Chassis Environment from left navigation pane to display environmental information about the routing platform chassis, including the temperature and information about the fans, power supplies, and Routing Engine

4. Select device R2 from Select device drop down box

5. Select Chassis -> Chassis Hardware to display a list of all Flexible Physical Interface Card Concentrators (FPCs) and PICs installed in the router chassis, including the hardware version level and serial number.

6. Select device R3 from Select device drop down box

7. Select Chassis -> Chassis pic pic-slot 3 fpc-slot 1 to display the FIC information, such as the FIC type, ASIC type, operating status, PIC version, and the amount of time the FIC has been online. The command output also displays port cable information.

Note: Please refer to the CertExams.com Juniper Network Simulator software for complete lab with GUI Interface.

Real Time Web Analytics

Clicky