CertExams.com Simulator Lab Exercises Answers

Setting interface description

Console Based   |    GUI Based

Console Based:

Description: In this exercise, description to an interface is set by using set description command.

Instructions:

1. Enter into configuration mode

2. Set the description of interface ge-0/0/0 as "interface-ge-0/0/0"

user@SW1>configure
[edit]
user@SW1#edit interfaces ge-0/0/0
[edit interfaces ge-0/0/0]
user@SW1#set description "interface-ge-0/0/0"
[edit interfaces ge-0/0/0]
user@SW1#exit
[edit]
user@SW1#

GUI Based :

Description: In this exercise, description to an interface is set by using set description command.

Instructions:

1. Select device R1 from Select device drop down box

2. Click Configure button that enables left navigation pane

3. Select Interfaces -> Interface Configuration

4. Interface configuration screen appears select so-0/0/0 interface from available interface list and click Edit button.

5. The Configure Interfaces screen appears. Enter "interface-so-0/0/0" in Logical Interface description field and click OK button

Note: Please refer to the CertExams.com Juniper Network Simulator software for complete lab with GUI Interface.

Real Time Web Analytics

Clicky