Certexams practice tests and network simulator Register             Login

CertExams.com Simulator Lab Exercises Answers

Enabling MPLS protocol on the interface

Console Based   |    GUI Based

Console Based:

Description: The lab exercise explains how to configure MPLS protocol on the interface.

Instructions:

1. Enter into configuration mode

2. Move to the protocols hierarchy

3. Enable the MPLS protocol on all or particular interface

4. Exit from the protocol hierarchy.

5. Confirm the configuration by entering the show command from configuration mode

user@R1>configure
[edit]
user@R1#edit protocols mpls
[edit protocols mpls]
user@R1#set interface all
[edit protocols mpls]
user@R1#exit
[edit]
user@R1#commit
commit complete
[edit]
user@R1#show


To enable the MPLS protocol on particular interface following command is used.


user@R1>configure
[edit]
user@R1#edit protocols mpls
[edit protocols mpls]
user@R1#set interface ge-0/0/0

GUI Based :

Description: The lab exercise explains how to configure MPLS protocol on the interface.

Instructions:

1. Select device R1 from Select Device drop down box

2. Click configure button and select MPLS -> MPLS Configuration from left navigation pane

3. MPLS Configuration screen appears. Select All option to enable MPLS protocol on all the interfaces and click OK button.

To enable MPLS protocol on particular interface click “Select Interface” option button and then select
interface from the drop down box and click OK button.

Real Time Web Analytics

Clicky